Cleaning The Drainage Hole; Removing The Fittings - Bosch CTS18 Series Information For Use

Table of Contents

Advertisement

ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads or
cleaning sponges.
Do not use harsh or abrasive de-
tergents.
Do not use cleaning products with
a high alcohol content.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
Never clean fittings and accessory
in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 18
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
→ Page 12
Putting the food into the appliance.
6.
11.3 Cleaning the drainage
hole
Regularly clean the drainage holes to
ensure that the condensation can
drain.
Remove the bottle rack.
1.
→ Page 20
Cleaning and servicing en
Carefully clean the drainage hole
2.
in the bottle rack and the drainage
hole in the appliance, e.g. using a
cotton bud.
11.4 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Lift the shelf at the rear
move it
⁠ .
and re-
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cts20 seriesCts22 series

Table of Contents