Electrolux ERT14001W8 User Manual page 12

12 electrolux
13. Put the top in position.
14. Pull it forward.
15. Screw both screws on the rear side.
16. Remove and install the handle
opposite side.
6) If foreseen
17. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
6)
on the