Kenwood TS-130SE Instruction Manual page 3

Hf ssb transceiver
Hide thumbs Also See for TS-130SE:
Table of Contents

Advertisement

santa
Pe
eee
ss00 nt epues atten scunnnseanntn ee04,
TS-130SE SPECIFICATIONS
jes e.uanuanosennenasenep annua sannateseaggtescg0ytuanysennttoscanpyanunnesengageseEEEb
cpu) -s4Haty=sENEboscODUDauUnnaseanene-cnUUy-ouunno settee -ctte-atnnnecentnescantnnsctteseatte
Setecorinyseananeseannescctiessnnaneceanencunysaannnecaunipeaannnacatnnne a
[GENERAL]
Frequency Ranga:
Mode:
Frequency Stability:
Power Requirement:
Dimensions:
Weight:
[TRANSMISSTER]
Final Power Input:
Audio Input Impedance:
RF Output Impedance:
Carrier Suppression:
Sideband Suppression:
Spurious Radiation:
Harmonic Radiation:
[RECEIVER]
Receiver Sensitivity:
Image Ratio:
IF Rejection:
Receiver Selectivity:
SSB/CW WIDE
SSB NARROW
CW NARROW
Audio Output Impedance:
Audio Output:
80 meter band
3.5 ~ 4.0 MHz
40 meter band
7.0~
7.3MHz
*30 meterband
= 10.1 ~ 10.15 MHz (10.0 MHz Receiving only)
20meterband
14.0 ~ 14.35 MHz
*17 meterband
18.068 ~ 18.168 MHz
15meterband
21.0 ~ 21.45 MHz
*12meter band
24.89 ~ 24.99 MHz
10 meterband
28.0 ~ 29.7 MHz
SSB/CW
Within +1 kHz during the first hour after 1 minute of warmup
Within 100 Hz during any 30-minute period after warmup
12 ~ 16V DC (13.8V Nominal)
RX: 0.7A 13.8V DC
TX:
19A 13.8V DC
241 (9.6) W x 94 (3.8) H x 293 (11.7) D mm (inch)
5.6 kg (12.4 Ibs)
80 —
15 meter band
200W PEP for SSB operation
160W DC for CW operation
10 meter band
160W PEP for SSB operation
140W DC for CW operation
5002 ~ 50 kQ
502
Better than 40 dB
Better than 50 dB
Better than 40 dB
Better than 40 dB
0.25uV at 10dB S+N/N
Better than 50 dB
Better than 70 dB
2.4 kHz (—6 dB), 4.2 kHz (— 60 dB)
1.8 kHz (—6 dB), 3.3 kHz (— 60 dB) with optional YK-88SN filter
500 Hz (—6 dB), 1.5 kHz (—60 dB) with optional YK-88C filter
270 Hz (— 6 dB), 1.1 kHz
(—60 dB) with optional YK-88CN filter
4~162
1.5W
NOTE:
Circuit and ratings may change without notice due to developments in technology.
*
Will transmit on the new 30, 17, and 12 meter bands.
Diodes installed for preventing accidental transmission be-
fore government amateur authorization.

Advertisement

Table of Contents
loading

Table of Contents