11 SERVICE WORK ON THE CHASSIS
80
–
Now press the fluid into the system until it emerges from
6
hole
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reser-
voir to prevent overflowing.
–
Remove the bleeding syringe. Tighten bleeder screw
–
Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
H04932-10
Fluid level below container
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
5
.
4 mm (0.16 in)