–
Position the upper triple clamp and handlebar.
–
Mount screw
Guideline
Screw, steering head,
top
S05332-11
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
F03764-10
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S05334-10
–
Tighten screw
Guideline
Screw, steering head,
top
S05335-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
S05335-11
SERVICE WORK ON THE CHASSIS 11
2
, but do not tighten it yet.
M20x1.5
3
of the right fork leg is positioned to
of the left fork leg faces the front.
4
.
M8
2
.
M20x1.5
5
.
M8
20 Nm (14.8 lbf ft)
12 Nm (8.9 lbf ft)
12 Nm (8.9 lbf ft)
12 Nm (8.9 lbf ft)
Loctite
®
243™
55