R-410A SEALED SYSTEM REPAIR
Replace 9k, 12k, and18k Cassette Type unit Compressor and Motor
Replacement of F an Motor
Step
6. Remov e the motor
and replac e it
7. Tighten the bolts
holding the motor
8. Mount the fan blade
and tighten the bolt
9. Reinstall the condensate
pan and tighten the screws
117
Illustration
Handli ng Instruction
Remove the motor and
replace it.
Use
a
wrench
or
socket
to
carefully
tighten the motor bolts.
Mount the fan blade and
use a wrenc h or socket to
carefully tighten the bolt
holding the fan blade in
place. D o not overtighten
as dam age may occur.
Use a screwdriver to
carefully tighten the screws
holding the condensat e
pan in place. T ake care to
not overtighten as dam age
to pa n will occur.