What If The Computer Does Not Work - IBM ThinkPad 700 PS/2 Reference Summary

To remove the unattended-start mode, do the
following:
1. Start the system programs from the hard disk
(see "Starting the System Programs" on
page 14).
2. Type your password and press
Enter.
3. Select
Set features
from the Main Menu.
4. Select
Set password and unattended start
mode.
5. Select
Set unattended start mode.
When the message
Set unattended start mode?
is displayed, type N.
18 Reference Summary
What If the Computer Does Not Work?
IMPORTANT - - - - - - - - - - - .
If this problem determination does not fix
your computer problems, consult the "Solving
Computer Problems" in the PS/2 ThinkPad
700 PS/2 Quick Reference.
Problem
Blank screen on
the LCD plus
one beep.
Blank screen
plus no beeps.
Nole: If you are
not sure about
the beeps, turn
the computer
off, then on
again, and listen
for the beep.
Check I Action
Verify that both the brightness and
contrast controls on the computer
are properly adjusted.
Verify that:
1. The battery pack is correctly
installed.
2. The AC adapter is connected
to the computer and the
power cord is plugged into a
working electrical outlet.
3. The computer power switch is
turned on.
4. The speaker volume control is
set to the rightmost (loudest)
position.
If the above items are correct and
the screen remains blank, have
the computer serviced.
19