Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita DUP361 Instruction Manual

Noise
The typical A-weighted noise level determined accord-
ing to EN62841-4-5:
Model DUP361
Sound pressure level (L
Uncertainty (K) : 3.1 dB (A)
Model DUP362
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-4-5:
Model DUP361
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
Model DUP362
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
) : 70 dB(A) or less
pA
) : 70 dB(A) or less
pA
2
or less
2
2
or less
2
Declarations of Conformity
For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Pruning shears safety warnings
1. Do not use the pruning shear in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.
2. Keep all power cords and cables away from
cutting area. Power cords or cables may be
hidden and can be accidentally cut by the blade.
3. Wear ear protection. Adequate protective equip-
ment will reduce the risk of hearing loss.
4. Hold the pruning shear by insulated gripping
surfaces only, because the blade may contact
hidden wiring. Blades contacting a "live" wire
may make exposed metal parts of the pruning
shear "live" and could give the operator an electric
shock.
5. Keep all parts of the body away from the blade.
Do not remove cut material or hold material
to be cut when blades are moving. Blades
continue to move after the switch is turned off. A
moment of inattention while operating the pruning
shear may result in serious personal injury.
When clearing jammed material or servicing
6.
the pruning shear, make sure the power switch
is off and the battery pack is removed or dis-
connected. Unexpected actuation of the pruning
shear while clearing jammed material or servicing
may result in serious personal injury.
7. Carry the pruning shear by the handle with the
blade stopped and taking care not to operate
the power switch. Proper carrying of the pruning
shear will decrease the risk of inadvertent starting
and resultant personal injury from the blades.
8. When transporting or storing the pruning
shear, make sure the blades are in the closed
position. Proper handling of the pruning shear
will decrease the risk of personal injury from the
blades.
9 ENGLISH