Binatone WTD-2000 Instruction Manual page 4

service agent or similarly qualified person in order to avoid hazard.
14. Warning : Do not damage the refrigerant circuit.
15. Warning : Do not use electrical appliances inside the food storage
compartments of the appliances, unless they are of the type recommended by
the manufacturer.
1.Water guard of upper cover
2. Indicator light
Power indicator (yellow)
Heating indicator (red)
Cooling indicator (green)
3. Natural water faucet (yellow)
4. Cold water faucet (blue)
5. Hot water faucet (red)
6. Waste water tank
7. Fridge (WTD-2000/WTD-2010) /
Cabinet (WTD-2010C)
8. Heating switch (red)
9. Cooling switch (blue)
10. Power cord
11. Drain cap
12. Condenser
Power indicator will be ON when you plug in.
Hot/Cold indicator will be ON after turning on the Heating / Cooling
switches, and turn OFF after water heating / cooling process finished.
About how to use the secured bracket.
1. Water dispenser
2. Wall fix screw
3. S type fix bracket
4. Water dispenser fix screw
Size of S bracket is 40x50x10mm,
the diameter of screw is 4mm, the
screw to be fixed at center of this
bracket.
Please use the bracket, which can protect the water dispenser from falling
down. Fix the bracket on the wall or fixed object so that to secure the water
dispenser. Water dispenser should be at least 6 inches from any wall.
4