Automatic Tuning; Manual Tuning - Philips AE 6745 Instructions For Use Manual

Hide thumbs Also See for AE 6745:

Tuning ® Presets

AUTOMATIC TUNING

e Press TUNING y / Ж briefly until the frequency on the

display changes rapidly; then release the TUNING У / Ж

button.

e Tuning stops when a strong radio signal has been found.

• You can interrupt tuning by pressing either the Y or 4

button.

MANUAL TUNING

Manual tuning 15 useful when you already know the frequency

of the transmitter (e.g. from your programme guide).

e Press TUNING У or Ж briefly until the right frequency has

been reached. In this way the frequency can be changed

step-by-step.

PRESETS

You can store the frequencies of 10 radio stations in the

memory, 5 on each wave range. А stored frequency is only ега-

sed from the memory by storing another frequency in its place.

How to preset a radio station

e Select the wave range and tune to the desired station.

e To store the radio frequency shown, press STORE. In the

display 'MEMORY' flashes briefly.

e Select the desired memory location using the PRESET

buttons. 'MEMORY' stops flashing. The selected radio

station is now stored in memory.

ЫЫ

Selecting PRESETS

e To select a preset station, first select the required wave

range and then press the desired PRESET button. The

preset station is selected and the display briefly shows

'MEMORY'.

Notes:

e Set the HOLD switch to ON to disconnect the push buttons.

Now your radio programme will not be interrupted if you

accidentally touch a button.

e Set the HOLD switch to OFF to re-activate the push

buttons.

Table of Contents