Connections - Yamaha KPA-502 Owner's Manual

÷ Be sure to disconnect power cords of all the audio and
video components from the AC outlets. Do not turn the
power on until all connections are completed.
Output
VCD/LD/CD player
Audio output Video output
(For VCD or LD)
AUDIO SIGNAL
VCD/LD TAPE
PLAY REC
L
R
1 3 4
Line input
Video
input
Subwoofer
For powerful sound
To reproduce a more powerful sound, connect a power
amplifier (instead of a subwoofer) to the PRE OUT jacks to
drive high-power speakers.
*1 GND terminal
Usually, it is not necessary to make a connection to this
terminal. However, when excessive noise exists, connect
the GND terminals of this unit and other components to
minimize the noise.

CONNECTIONS

Cassette deck
Input
VCR
Audio Video
output output
PRE VIDEO SIGNAL
OUT
AUX VDC/LD AUX
1 2
MONITOR OUT
Video
input
Monitor 1 Monitor 2
÷ When making connections between this unit and other
components, make sure that all connections are correct,
L (left) to L, R (right) to R.
SPEAKERS
6 MIN./SPEAKER
R L
+ — — +
Right Left
Speakers
(For connections to the
SPEAKERS terminals,
see the next page.)
General model
VOLTAGE
SELECTOR
AC OUTLETS
UNSWITCHED
Power cord
100W MAX. TOTAL
GND
See next page. *1
\
To an AC
outlet
5