Total Level; Saving Effect Programs - Yamaha GW33 Owner's Manual

TOTAL LEVEL

N.GATE/UTIL
This determines the overall level of the GW33's output.
Make sure to set this to an appropriate value. If Total
Level is set to zero, no sound will be output from the
GW33.
NOTE When all effect blocks are off and this parameter
is set to 15, the output level is equal to the level when
Bypass is on.

SAVING EFFECT PROGRAMS

OPERATION
1
After making the desired parameter settings to the
selected program in the Edit mode (see page 18),
press the s button. (The SWAP/
WRITE lamp lights.)
2
If desired, select the destination User program
number (11 – 55) by using Parameter Dial A.
If the selected program is in the User banks and you
want to replace the original settings with the ones
you've just made, you can skip to step #3.
NOTE When you've edited one of the Preset
programs (61 – 05) and try to save it, "—" appears in
the BANK/MEMORY indicator until you select one of
the User program numbers (11 – 55).
3
To actually save the new settings, press the y
button. (Operation returns to the Play mode.)
To cancel the operation without saving, press the
n button.
— — — — - - -
A
COPY / SWAP / WRITE
•••••••••••••••••••••••••••••••••••••••••••••••••
MEMORY NO.
Once you've edited an effect program, you can save the settings to one of the User program
numbers for future recall of the program. (Also see page 15 for information on saving effect
programs.)
THRESHOLD VOLUME POSITION
B C
1
1 1
OPERATION
1
1
1 1
1
Enable the Edit mode (press the e
1
1 1
1
button), and select the Noise Gate/Utility block.
1
1 1
1
1
1 1
2
Change the Total Level parameter value with
1
1
1 1
Parameter Dial E.
1
1
1 1
1
1
1 1
1
1
1 1
1 1
1 1
1 1 Pressing n returns to the program that you've
1
1 1
been editing. The settings are saved temporarily, and
1 1
1 1
you can continue editing the program.
1 1
1 1
1 1
HINT Even if you have properly saved your new
1 1
1 1 settings to a program, you may want to write down those
1 1
settings on a piece of paper or on a copy of the Blank
1 1
Effect Parameter Chart (on page 38) to avoid the possibil-
1 1
1
ity of losing them later, should you decide to edit over the
1 1
1 1
same program.
1 1
1 1
1 1
1 1
1 1
1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
MINIMUM VOLUME TOTAL LEVEL
D E
31