Playing With The Preset Effects - Yamaha GW10 Owner's Manual

PLAYING WITH THE PRESET EFFECTS

16
Guided Tour
Now that you've set up your GW10 and are ready to use it, let's try playing
with some of the preset effects. (If you haven't already done so, read through
the SYSTEM OVERVIEW section on pages 8–11 for information on the basic
structure of the GW10 and how to select effect programs.)
1
First, try playing with a bright chorus effect. Use the M Pedal
Switch to select bank 3, program number 5. (Hold down the Pedal Switch
to select the desired bank, and press it repeatedly to advance to the proper
program number; see pages 10–11.)
NOTE For this and the other examples that follow, make sure that the
Foot Controller is at or near the maximum position, to ensure proper
volume.
2
Now, try a heavy distortion sound. Use the M Pedal Switch
again, this time selecting bank 2, program number 1.
3
Next, let's call up an interesting delay effect. Use the M
Pedal Switch to select bank 1, program number 3.
4
Before going on to the next section, try exploring some of the other effect
programs of the GW10. Look through the Preset Effect Program list on
page 44 for more information about the programs, and play with a few of
them to hear how they sound.
A=44
Hz
BANK
MEMORY / TUNER
A=44
Hz
BANK
MEMORY / TUNER