Panasonic PT-L711U Operating Instructions Manual page 13

«Connector panel»
09600
00000
apapa
(DSERIAL connector
(pages 18, 19 and 32)
This connector is used to connect
a personal computer to the
projector in order to externally
control the projector. (RS-232C
compatible)
(2 AUDIO OUT jack
(pages 18 and 19)
This jack is used to output the
audio signals which are input to
the projector. If audio equipment
is connected to this jack, no
sound will be output from the
built-in speakers.
(3 RGB1 IN/RGB2 IN connectors
(pages 18 and 19)
These connectors are used to
input RGB signals and YPBPR
signals.
(4 RGB AUDIO IN jack
(pages 18 and 19)
Only one system is provided, so
connect the appropriate
connector when using RGB1 or
RGB2.
(5) VIDEO IN jack
(page 18)
This jack is used to input video
signals from a video equipment
such as a video deck.
Prepar
(6 AUDIO IN L-R (for VIDEO/S-
VIDEO) jacks .
(page 18)
Only one system is provided, so
connect the appropriate
connector when using VIDEO or
S-VIDEO.
(2) S-VIDEO IN connector
(pages 18 and 31)
This connector is used to input
signals from a S-VIDEO-
compatible equipment such as a
video deck. The connector is S1
signal compatible, and it
automatically switches between
16:9 and 4:3 aspect ratios in
accordance with the type of
signal being input.
13