Mil-Spec - Dell Precision 5480 Technical Manualbook

Mil-SPEC

The Precision 5480 meets military specifications for the following MIL-STD 810G tests:
Table 48. Tower - Military specifications
Test Category
Non-operating altitude test
Operating altitude test
Non-operating high temperature test
Operating high temperature test
Non-operating low temperature test
Operating low temperature test
Humidity test
Shock material to be packaged
Mechanical shock test - I
Bench handling
Sand and dust
Blowing dust
Test Method Test Parameters
Method 500.6 Test specification:
Procedure I
● Altitude: 15,000 ft
● Temperature: 21°C
Method 500.6 Test specification:
Procedure II
● Altitude: 15,000 ft
● Temperature: 21°C
Method 501.7 Test specification:
Procedure I
● High temperature cycles, climatic
category A1 - Hot dry
● Duration: 7 cycles, Non-Operating
Method 501.7 Test specification:
Procedure II
● Temperature: 60°C
● Duration: 120 hours constant
Method 502.7 Test specification:
Procedure I -
● Temperature: -51°C
Storage
● Duration: 24 hours
Method 502.7 Test specification:
Procedure II -
● Temperature: -29°C
Operation
● Duration: 24 hours
Method 507.6 Induced B3
Procedure I
● Duration: Hot-humid, 15 days exposure
Induced B3, Non-operating
Method 516.8 Test specification:
Procedure II
● On-road shock - 5.1 g/11 m
● Off-road shock - 15.2 g/5 m
Method 516.8 Test specification:
Procedure VI
● Rise test units at one edge 100 mm (4-
inch) or an angle of 45°about a solid
wooden bench top.
Method 510.7 Test specification:
Procedure I
● Relative humidity: 30%
● Dust concentration: (10.6±7) g/m³
● Air flow velocity: 1.5 m/s to 8.9 m/s
Engineering specifications 37