Table of Contents
Advertisement
4
Heat the microwaveable heating bag additionally and apply it on the bottom edge of
the back cover for 3 minutes.
5
Place the suction cup in the center of the bottom edge of the back cover, and lift
upwards while separating it with the opening pick.
As the back cover can be damaged by excessive force, be careful not to damage
•
the back cover.
As the internal circuitry can be damaged, do not insert the opening pick more
•
than 3 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the back cover to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
Disassembly and Assembly
62
Advertisement
Table of Contents
