Table of Contents
Advertisement
When disconnecting the AC power cord's
e Pulling the AC power cord itself may damage
plug, always hold the plug
the cord, causing a fire, electric shock or
and pull it to remove it.
L
4
short-circuit.
l
The product is not completely disconnected from the
0 Failure to do so may cause fire in case of
power supply even when the power switch is turned
lightning.
off. Ifthe product will not be used for a long time,
€ Failure to do so may over-heat the product,
unplug the AC power cord from the AC outlet.
resulting in fire.
This product may be equipped with a polarized line plug (one blade
wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
It is a good practice to have the instrument near the AC outlet and the power cord plug in a position so
that it can readily be disconnected in an emergency because electricity is always charging while the plug
is in the AC outlet even in a power switch off conditiion.
Indicates a potential hazard that could result in injury
CA UTI O N or damage to the product or other
Do not use the product in the following areas.
Using the product in such areas may result in
0 Areas, such as those near windows, where the product is
product breakdown.
exposed to direct sunlight
O Extremely hot areas, such as near a heater
O Extremely cold areas, such as outside
O Extremely humid areas
0 Areas where a large amount of sand or dust is present
O Areas where the product is exposed to excessive
vibrations
-Before connecting
cords, make sure
¿E=zl=> \OFF) . Failure to.do.so.may.cause
breakdown of this. _ | .
that the power to this product
==,
product and other devices.
ar other devices is turned
FF.
Take care not to allow any foreign
2
Entry of water, needles or hair pins may result
matter to enter the product.
É
=>
in breakdown or short-circuit.
'
The product shall not be exposed to dripping
or
splashing. No objects filled with liquids, such as
vases, shall be placed on the product.
Do not drag the product on the fioor.
SA
Please lift up the product when moving it.
Take care not to drop the product.
N
Please note that the product is heavy and must
be carried by more than two persons.
Dropping the product may result in breakdown.
Do not place the product near electrical
€ Doing so may cause the product to generate
appliances such as TVs and
tae E
FR
noise.
ag ios.
4
SY
@ If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.
When connecting the AC power cord
N
Failure to do so may damage them, resulting in
and other cords, take care
DRC
=
fire, electric shock or short-circuit.
not to get them tangled.
/N
IS
Do not wipe the product
with benzene
e Doing so may result in discoloration or deformation
@ When cleaning the product, put a soit cloth in
lukewarm water, squeeze it well, then wipe the
product.
Advertisement
Table of Contents
