Mitsubishi XPANDER 2024 Manual page 13

Stabilization method for a rollover or overturned vehicle
WARNING:
• Use supports with enough strength.
• When installing prop tools, avoid exhaust systems, fuel systems, high voltage parts, high voltage wiring cables, etc.
• If the inside of the high voltage components or the high voltage wiring cable is exposed, avoid the exposed parts
when installing.
・Stabilization method for prop tools of rollover vehicle
Please support the prop tools on the vehicle roof or the vehicle bottom. Depending on the situation, support the prop
tools with 2, 3, or 4 to stabilize it.
・Stabilization method using blocks, etc. of rollover vehicle
To upright the vehicle, use a spreader or jack, etc., and place supports such as blocks in the gap to stabilize it.
・Stabilization method using wheel stoppers, blocks, props, etc. of overturned vehicle
Blocks or wheel stoppers are set up in the gap between the hood and pillars to stabilize the vehicle.
To increase the stability, place a column at the rear of the vehicle (a strong place) to stabilize it.
Spreader
12