Philips CDR800 - annexe 2 Manual page 23

Hide thumbs Also See for CDR800 - annexe 2:
Table of Contents

Advertisement

xp CDR800/17 eng./dr.5
09-02-2001 12:11
Troubleshooting
Stops during recording
Missing directories on MP3-CD
INSERT DISC indication
USE AUDIO CD indication
CHECK INPUT indication
START SOURCE indication
Unexpected start of Demo mode
(automatic display of recorder features)
Set does not react
28
Pagina 28
– Use Philips audio CDR(W)s.
– In case recording process is interrupted (power loss, mechanical shock), start
recording again with a new disc.
– Only albums with playable files will be shown
– replace or clean the disc
– insert a CD(RW), label upwards
– wait until the lens has cleared
– insert a digital audio disc marked with "Digital audio" and the special logo
– select the correct input
– make sure the digital source is switched on
– make sure the connection cable is properly connected
– start the synchronized external recording by pressing PLAY on the external
source you want to record from.
– Press any key to cancel Demo mode temporarily.
– Keep STOP 9 on the set pressed for at least 5 seconds to cancel Demo
mode permanently.
– Unplug the set, then replug it

Advertisement

Table of Contents
loading

Table of Contents