Table of Contents
Advertisement
Introduction
Please read these instructions carefully before
trying to put this camera into operation.
The illustrations referred to in the text are printed
on the fold out flaps of the front and back cover of
the booklet.
This video camera incorporates a highly sensitive
solid state image sensor (CCD). In conjunction with
an appropriate power supply unit and a lens, it will
produce fully interlaced colour video images,
according to the PAL/NTSC standard.
Mounting the camera
The camera features two accessory rails (fig. 7-C),
one on the top and the other at the bottom of the
camera housing. The mounting socket unit fits both
rails and can be fixed in any position.
Mounting accessories
Video camera accessories, such as video lights, a
microphone etc., can be installed on both accessory
rails (fig. 1-C). These rails will accept all accessory
shoes adhering to standard JIS B7101-1975. The
cable clamps which are enclosed, also fit into the
accessory rails.
Connecting the camera
Power
supply
This camera must be powered with a separate,
galvanically insulated, AC or DC power supply unit.
e The AC input should be 24 V AC (+ 15% / -50%).
2
Advertisement
Table of Contents
