Advertisement
Enjoy
3
Call
• To make a call, press
and dial the phone number.
• To answer a call, press
when the phone rings.
• To end a call, press
.
Adjust the earpiece volume
Press
or
to adjust the volume during a call.
Phonebook
Add record
1 Press MENU/OK, then select [phONEbOOK] > [ADD
NEw], then press MENU/OK to confirm.
2 Enter the name, then press MENU/OK to confirm.
3 Enter the number, then press MENU/OK to confirm.
Call from the phonebook
1 Press
or, press MENU/OK, then select [phONEbOOK]
> [VIEw], then press MENU/OK to confirm.
2 Select a contact.
3 Press
to make the call.
Direct access memory
You have 2 direct access memories (Keys 1 and 2). To dial the
saved phone number automatically, press and hold on the keys in
idle mode.
Depending on your country, keys 1 and 2 are preset to [1_
VOICEMAIL] (voice mail number) and [2_INfO sVC]
(information service number) of your network operator
respectively (network dependent).
Call log
1 Press
and select a record.
To make a call
2 Press
.
To view more details
2 Press MENU/OK.
3 Select [VIEw].
To save a call record to the phonebook
2 Press MENU/OK.
3 Select [sAVE NUMbER].
4 Press MENU/OK to confirm.
5 Enter the name.
6 Press MENU/OK to confirm.
7 Press
MENU/OK
to save.
To delete a call record
2 Press MENU/OK.
3 Select [DELEtE] or [DELEtE ALL].
4 Press MENU/OK to confirm.
Redial list
1 Press
REDIAL/C
and select a record.
To make a call
2 Press
.
To save a call record to the phonebook
2 Press MENU/OK.
3 Select [sAVE NUMbER].
4 Press MENU/OK to confirm.
5 Enter the name.
6 Press MENU/OK to confirm.
7 Press
MENU/OK
to save.
To delete a call record
2 Press MENU/OK.
3 Select [DELEtE] or [DELEtE ALL].
4 Press MENU/OK to confirm.
Record an announcement
(for CD195 only)
1 Press
MENU/OK
> [ANsw MAChINE] >
[ANNOUNCEMENt], then press MENU/OK to confirm.
2 Select [ANswER ONLy] or [RECORD ALsO], then
press MENU/OK to confirm.
3 Select [RECORD NEw], then press
MENU/OK
confirm.
4 Start recording close to the microphone after the beep.
5 Press
MENU/OK
to stop recording.
You can listen to the newly recorded announcement on
»
the handset.
Register the handsets
You can register additional handsets to the base station. The base
station can register up to 4 handsets.
1 Press
MENU/OK
on the handset.
2 Select [sERVICEs] > [REgIstER], then press
MENU/OK to confirm.
3 Enter the system PIN (0000).
4 Press MENU/OK to confirm the PIN.
5 Press and hold
on the base station for 5 seconds.
Registration is completed in less than 2 minutes.
»
Restore default settings
You can reset your phone settings to the original factory settings.
1 Press MENU/OK.
2 Select [sERVICEs] > [REsEt], then press
confirm.
The handset displays a confirmation request.
»
3 Press MENU/OK to confirm.
All settings are reset.
»
to
MENU/OK
to
Advertisement
