Table of Contents
Advertisement
Notes on the cable protector
Use the cable protector to prevent a cable from being disconnected when
shooting images with the cable connected.
To attach the cable protector
Open the HDMI terminal cover,
headphone terminal cover, and
USB terminal cover.
Fit the hook of the cable
protector into the notch below
the Multi/Micro USB terminal,
and press down so that it does
not come off, and then attach
it so that it covers the terminal
surface of the unit.
Push the attachment screw in
and turn it to secure the cable
protector.
Insert the cable into one of the
jacks.
Insert the cable into the holding
part and then secure the cable
with the fixing dial.
To remove the cable protector
Loosen the attachment screw, and then remove the cable protector.
Hook
Attachment screw
Fixing dial
Notch
EN
75
Advertisement
Table of Contents
