Table of Contents
Advertisement
Available languages
Available languages
(4) As shown in Fig.3, gently push the lower side of the case and open its cover. Keep the removable
face plate in the case. Then, you can bring the plate safety.
@ Removable face plate case
@ Open
7
@ Push
Fig. 3
To install the Removable Face Plate
(1) Fit either the edge of right or left holes in the face plate over the main units pin, and fit it over on
the other side while pushing it.
Fig. 4
Security Indicator
(2) After fitting the face plate holes, move the face plate up and down a few times to make sure that it
has been fitted securely.
Contact
Fig. 5
@ Close the front panel and press the right side of face plate until "click" is heard.
Caution: :
l
Pee
i
a
Ae Before removing the removable face: Sita, riake's sure he power, is at
"2. This-removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3: Do not remove the: removable face plate, while driving your car.
. Do not place the removable face: plate on the dashboard of nearby areas where the tempera-
ture rises to high levels.
E
. Do: not touch the contacts onthe, removable face plate or on nthe main unit since this may: result
'in poor electrical contacts.
. if dirt or other foreign substances get on the: contacts, wipe: them with a clégh, dry cloth.
7. Don't t apply ariy ao downward force onto the face piste being opan, or: 'it mano be damaged.
29
Advertisement
Table of Contents
