LG WT6100C Series Owner's Manual page 34

34 MAINTENANCE
4
Immerse the water inlet hoses in hot water to
thaw them.
5
Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets.
• See Connecting the Water Inlet Hoses for
details.
6
Turn on the faucets.
7
Press the Power button to turn on the
washer.
8
Select the Spin Only cycle. There will be a
brief rinse before the tub drains and spins.
9
Press the Start/Pause button and check that
the water fills properly.
When the Drain Hose is Frozen
1
Pour hot water in the washer tub and close
the lid.
2
Wait for 1 - 2 hours.
3
Press the Power button to turn on the
washer.
4
Select the Spin Only cycle to drain and spin
the tub.
5
Press the Start/Pause button to make sure
the water drains.