Additional Operations - Yamaha RX-V2500 Owner's Manual

PLAYBACK
Remote control operation
+ +
TV VOL CH VOL
– –
A / B / C / D / E
TV MUTE TV INPUT MUTE
TOP EXIT
TITLE MENU
ENTER
RETURN DISPLAY
STEREO MUSIC ENTERTAIN
1 2 3
THX STANDARD SELECT
5 6 7
1 MEMORY 2 A SPEAKERS
9 0 +10
Set AMP/SOURCE/TV to AMP, then press one of
the sound field program buttons repeatedly to
select the desired program.
The name of the selected program appears in the front
panel display and video monitor.
AMP
SOURCE
TV
V–AUX DVR/VCR2 VCR 1 CBL/SAT
SP
A
H a l l i n M u n i c h
Program name
y
Choose a sound field program based on your listening preference,
and not on the name of the program.
Notes
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when the MULTI CH
INPUT is selected.
34
AMP
+
SOURCE AMP/SOURCE/TV
– TV
PURE DIRECT
NIGHT
AUDIO
STRAIGHT
EFFECT
MOVIE
Sound field
4
program buttons
EXTD. SUR
8
B
ENT.
STEREO MUSIC ENTERTAIN MOVIE
1 2 3 4
THX STANDARD SELECT EXTD. SUR
5 6 7 8
1 MEMORY 2 A SPEAKERS B
9 0 +10 ENT.
DTV DVD MD/TAPE CD–R CD TUNER
HiFi DSP

Additional operations

To adjust the tone
You can adjust the bass/treble
balance for the front left/right and
center channels.
Press TONE CONTROL
repeatedly on the front panel to
select TREBLE or BASS.
Select TREBLE, then rotate
PROGRAM to the right or left to
increase or decrease the high-
frequency response.
Select BASS, then rotate PROGRAM to the right or left to
increase or decrease the low-frequency response.
To cancel the tone control, press TONE CONTROL
repeatedly to select BYPASS.
Notes
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality of the
surround speakers may not match that of the front left/right and
center speakers.
• TONE CONTROL is not effective when THX (page 45) or
PHONO
PURE DIRECT (page 37) is selected, or when MULTI CH
dB
VOLUME
L L R
INPUT is selected.
• If headphones are connected to this unit, the TONE CONTROL
setting adjusts the bass/treble balance of your headphones
(see page 56).
To mute the sound
Press MUTE on the remote control.
The MUTE indicator flashes on the
front panel display.
To resume the audio output, press
MUTE again (or press VOL –/+). The MUTE indicator
disappears from the display.
y
You can adjust the muting level (see page 57).
To listen with headphones
("SILENT CINEMA")
"SILENT CINEMA" allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
surround, through ordinary headphones. "SILENT
CINEMA" activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the "SILENT CINEMA" indicator lights up in
the front panel display.
Notes
• This unit will not be set to
CH INPUT is selected as the input source.
"
• SILENT CINEMA
2ch Stereo program is selected, or in STRAIGHT mode.
TONE CONTROL
PROGRAM
MUTE
" "
SILENT CINEMA
"
is not effective when PURE DIRECT or a
when MULTI