Clearing Preset Stations - Yamaha RX-V1065 Owner's Manual

FM/AM tuning
y
• You can select the preset number at which the preset starts by
pressing ePRESET k / n or jCursor k / n while "READY"
is displayed on the front panel display.
• To cancel registration, press jRETURN.
Status
01:FM 87.5 MHz
Preset number
During the automatic station preset, "MEMORY"
appears in the front panel display each time a station
is registered.
When registration is complete, "FINISH" appears
and then the display returns to the Option menu.
To return the display to the original state, press
rOPTION.
Registering stations by manual station
preset
You can manually register FM stations with weak signals
or AM stations.
1
Tune in to the desired station (page 29).
y
• (U.S.A. model only)
To register a sub-audio program of the HD Radio station (HD2 to
HD8), press vPRG SELECT to select the desired audio
program.
2
Press EMEMORY (or eMEMORY).
"Manual Preset" appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
y
• By holding down EMEMORY (or eMEMORY) for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (next to the
lastly-registered preset number).
3
Press FPRESET l / h (or ePRESET k / n)
to select the preset number to which the
station will be registered.
When you select a preset number to which no station
is registered, "Empty" appears. When you select a
preset number to which any station has been already
registered, the frequency of the station is displayed.
Frequency to be registered
01:Empty
Status of the selected preset number
Flashes
Preset
number
y
• You can also select a preset number using the lNumeric
keys.
30
En
Frequency
4
Press EMEMORY (or eMEMORY).
When registration is complete, the display returns to
the original state.
y
• To cancel registration, press jRETURN or leave this unit
without any operations for about 30 seconds.
Calling a preset station (Preset tuning)
You can call preset stations registered by automatic station
preset or manual station preset.
Press FPRESET l / h (or ePRESET k / n) to
select a preset number.
y
• Preset numbers to which no stations are registered are skipped.
• "No Presets" or "No Presets in Memory" is displayed if no stations are
registered.
• You can directly select a preset number by pressing lNumeric keys
while calling a preset station. "Empty" appears on the display if you
enter a preset number to which no station is registered. "Wrong Num."
appears if you enter an invalid number.
• When you press lNumeric keys during normal tuning, a frequency
is entered. Set tuning mode to preset tuning mode using FPRESET l
/ h (or ePRESET k / n) prior to the operation.
• (U.S.A. model only)
This unit may take a little time to call a sub-audio program of an HD
Radio station.

Clearing preset stations

1
Rotate the RINPUT selector (or press
dTUNER) to select "TUNER" as the input
source.
2
Press rOPTION on the remote control.
The Option menu for "TUNER" is displayed
(page 47).
3
Press jCursor k / n to select "Clear Preset"
and then press jENTER.
01:FM 92.5 MHz
Preset number
y
• To cancel the operation and return to the Option menu, press
jRETURN.
4
Press jCursor k / n to select a preset
number to reset and then press jENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat step 4.
To exit the Option menu, press rOPTION.