Table of Contents
Advertisement
| Meyer-1i lave Mr: Mel -1 (crea ice)
— Multi-AMS (Automatic Music Sensor)
By detecting the blank space between selections, the Multi-AMS function allows you
to skip up to 30 selections during fast forwarding or reversing to locate the beginning
of a selection.
During playback, press PP or << as many times
as the number of selections to be skipped.
For selections after the current one: press PP the
required number of times.
For selections before the current one: press <4
the required number of times".
* Pressing <4 once locates the beginning of the
current selection.
: Beginning of selection
«[2]
<<{ i]
pe [i]
>> ic)
Previous
Current
Next
selection
selection
selection
* The number of
selections to be
—
skipped, which replaces
arene
the counter indication,
"4
decreases by one each
time a blank space is
detected.
* The play indicator flashes during Multi-
AMS operation.
+ When the beginning of the desired
selection is reached, the counter indication
returns and playback automatically
restarts.
1y\
Modifying the indicated number of selections to be
skipped
The number of selections to be skipped may be modified by
pressing the <4 or
> button at any time, even during Multi-
AMS operation.
Regarding changes in the indicated number
The indicated number of selections to be skipped may
change even as it is being set due to the detection of blank
spaces during fastwinding of the unit.
The Multi-AMS may skip a selection in the following
cases:
+ If the PR (or <4) button is pressed immediately before the
following selection.
« If there is noise in the space between selections.
+ If the space is less than four seconds long.
The Multi-AMS will treat the following as blanks:
* along pause in the music
* a passage of low frequencies or very low volume
* a gradual increase or decrease in volume
Advertisement
Table of Contents
