Table of Contents
Advertisement
When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono (main language) or SAP (sub language) broadcasts.
' 8) playback non Hi-Fi tapes in monaural.
* The selected broadcast sound is always recorded on left and right Hi-Fi track as well as the normal monaural
track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
Audio Mode for Recording
Display audio mode.
Press SAP/ Hi-Fi.
SAPHi-Fi
Select desired mode.
Press SAP/ Hi-Fi
SAPHi-Fi
| repeatedly (each
press within 5
seconds).
* Refer to the "Receivable
Broadcast Types" on page 24.
* The arrow indicates
your selection.
Doa recording.
See page 9.
3
Audio Mode for Playback
Start playback.
See page 8.
Display audio mode.
SAP/Hi-Fi
Press SAP/ Hi-Fi.
Select desired mode.
Press SAP/ Hi-Fi
HIFI
(L/A) 4
* Select "HIFI(L/R)" or *HIFI(L)" or
"HIFI(R)" to listen to stereo
recordings in stereo sound.
Select "NORMAL" for monaural
sound.
• The arrow indicates
your selection.
EXCT
DISPLAY
C5 OOo
SAP/
Hi-Fi
О,
С:
М:
* Only tapes recorded in Hi-Fi stereo
will play back with true stereo sound.
Standard stereo tapes will play back
in monaural sound.
* To listen to Hi-Fi stereo playback, the
VCR AUDIO (L/R) jacks must be
connected to a stereo TV or an
external stereo amp and speakers.
(See page 24.)
* If tracking is adjusted during playback,
Hi-Fi audio may revert to normal audio.
* Hi-Fi and normal audio playback
volume level may differ.
ui9]s
09191
!J-IH
SHAA
SLN
25
Advertisement
Table of Contents
