Digital Audio Соппесїопз - Coby DVD505 User Manual

High-resolution 5.1 channel dvd player
Hide thumbs Also See for DVD505:
Table of Contents

Advertisement

Digital audio connections
processing or MPEG processing A
When DVDs recorded in Dolby Digital or MPEG audio are played, Dolby
Digital bitstream or MPEG audio bitstream is sent to the player's
OPTICAL digital audio output connector or COAXIAL digital audio output
connector. When the player is connected to a Dolby Digital or MPEG audio
decoder via one of these output sockets, you can enjoy theater quality
audio in you home. An optical digital cable or coaxial audio cable(both
optional) is required when a Dolby Digital decoder or MPEG audio decoder
is used.
Audio output from the optical/coaxial digital audio output connectors:
Di
Sound recording
Optical/coaxial digital audio output
|
Isc
format
from connector
е
Dolby Digital bitstream(2-5.1ch)
Dolby Digital
or PCM(2ch)(48kHz/16bit)
Linear PCM (48/96 | Linear PCM(2ch)
DVD
kHz POM bit)
(48/kHz sampling/16 bit only)-2
|
ог по outputs
MPEG2 audio bitstream or
УЕ
ВЕЕР
PCM(2ch)(16 Ый).
VCD
MPEG1
PCM (44.1kHz sampling)
cD
Linear PMC
Linear PCM (44.1kHz sampling)
*1.The type of audio output from the connector сап be selected by the
initial settings.
*2.Audio having 96kHz sampling is converted into 48kHz sampling when
it is output from the players optical/coaxial digital audio output connector.
Lett surround speaker
For your reference :
ө Dolby Digital is a digital sound compression technique developed by the
Dolby Laboratories Licensing Corporation.
Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound,
this technique enables a large quantity of sound data to be efficiently
recorded on a disc.
ө
Linear PCM is a signal recording format used in CDs. While Cds are
recorded in 44.1 kHz/16 bit, DVDs are recorded in 48kHz/16 bit up to 96kHz/24 bit .
Ф
If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit
of Pro Logic from the same DVD movies that provide full 5.1channel Dolby
Digital soundtracks, as well as from titles with the Dolby Surround mark.
Caution for the optical/coaxial digital audio output connector:
®
Do not connect an amplifier (with an optical/coaxial digital input connector)
which does not contain the Dolby Digital or MPEG audio decoder.
@
Anattempt to play DVDs through an amplifier without the correct or MPEG
decoder, may produce extreme levels of noise. This could damage both your
ears & your loudspeakers.
®
VCD and Audio CDs can be played as normal.
11
Front right speaker
Right surround speaker

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd606

Table of Contents