Maintenance; Dust / Dirt On The Outer Casing Part(S); Dust / Dirt On The Lens Glasses (Lens Cleaning); Cleaning Procedures Of Outside Surface Of The Lens - Panasonic Lumix H-ES12035 Service Manual

5 Maintenance

5.1. Dust / Dirt on the outer casing part(s)

1. Blow off the dust first, then sweep out the dust from narrower spaces with soft cleaning brush.
2. Wipe up the outer casing part with the dry fuzz-free cloth.

5.2. Dust / Dirt on the Lens Glasses (Lens Cleaning)

5.2.1. Cleaning procedures of outside surface of the Lens

1. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not blow strongly.)
2. Wipe out the dirt on the Lens glass surface with Lens Cleaning Kit (VFK1900BK) if necessary.
(Consult the instruction sheet which is included in the Lens Cleaning Kit in details.)
【Cleaning Instruction】
Wipe the Lens surface with
cleaning sheet starting
from centre towards to
outside in a circular motion.

5.2.2. Cleaning procedures of inside surface of the Lens

1. When removing the each above unit, it has to be proceed inside of satisfied clean level.
(Less than class 10,000 (Federal Standard 209D))
As for clean box, refer to the "4.2. Clean Box", in details.
2. The inside of the 5th Lens Frame Unit applied Nano Surface Coating technology.
Never touch the inside of the 5th Lens Frame Unit while Cleaning.
This place does not allow to wipe with any cleaning material, but only allow air blow
If this place remains astain like finger print, the Lens is no longer able to use, but need to be replaced
1st Lens Unit
2nd Lens Unit
OIS Unit 4th Lens & AF Rock
Never touch inside of 5th Lens Frame
5th Lens Frame Unit
6