Saving The Registration Memory As A Bank File - Yamaha PSR-S710 Owner's Manual

4
Press one of the REGISTRATION MEMORY [1] – [8] buttons to
which you wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button
contains data and its number is selected.
About the lamp status
• Red: Data registered and currently selected
• Green: Data registered but not currently selected
• Off: No data registered
5
Register various panel setups to other buttons by repeating
steps 1 – 4.
The registered panel setups can be recalled by simply pressing the desired
number button.
Saving the Registration Memory as a Bank file
You can save all the eight registered panel setups as a single Registration Memory
6
Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the Registration Bank Selection Display.
2
Press the [6▼] (SAVE) button to save the Bank file.
For instructions on saving, refer to page 58.
72
PSR-S910/S710 Owner's Manual
Bank 04
Bank 03
Bank 02
Bank 01
CAUTION
If you select the button whose
lamp is lit in red or green here,
the panel setup previously
memorized to the button will be
erased and replaced by the new
settings.
NOTE
The panel setups registered in the
numbered buttons are preserved even
when you turn off the power. If you
want to delete all the eight current
panel setups, turn the [STANDBY/ON]
button on while holding the B5 key
(right-most B key on the keyboard).
2