Sip Mlt Auto Configuration - NEC UNIVERGE SV9100 Manual

102
version information)
6. Reboot the SIP MLT to start the upgrade process.
SIP MLT Hardware Versions:
ITL-2E/6E – 09.01.03.00
ITL-8/12/24/32D – 09.01.03.03
ITL-320C – 09.01.03.04
WARNING: If the firmware version set in PRG90-42-01 is different to the actual version loaded onto the
TFTP/FTP server, the download by the SIP MLT will be repeated in an endless loop.
WARNING: The firmware download feature does not support flow control so it is possible that the TFTP/FTP
server may not be able to handle the number of download requests. To minimize this problem do not
restart a large number of SIP MLT's at the same time. Also using a high spec PC or server may reduce the
problem.
2.5.1.6

SIP MLT Auto Configuration

SIP MLT Auto Configuration
It is possible for a DT800/DT700 IP terminal to download a configuration file from an FTP server when it
initializes.
To use this feature the following equipment is required: -
IP Phone Manager software
FTP Server
DHCP Server supporting the following: -
o
o
Building the Configuration File
1. Launch the IP Phone Manager software
2. Click Auto Config
Vendor Class
Option Codes