Advertisement
@ Deck | EJECT switch
Deck | Operation switches
CO) STOP ............. For stopping the tape.
me FAST............ Fast forward in forward mode, rewind in reverse
mode.
Music search (MS) starts if this is pressed during
playback.
<< FAST ............ Rewind in forward mode, fast forward in reverse
mode.
Music search (MS) starts if this is pressed during
playback.
@DECK II RECORDING switches
MUTE (0).......... Used for creating a blank space between songs.
The unrecorded space is created for as long as this
switch is kept depressed.
REC (@) oa.
To set to recording standby mode.
Recording
begins when
you press the PLAY switch (<J
or
}),
PAUSE ((0)......... Temporarily
stops tape travel. Cancels pause
mode
when
pressed
again or press
the PLAY
switch.
Deck II Operation switches: Same as Deck | operation
switches
@) Deck tl EJECT switch
Remote control unit
@ POWER key
@ Function keys
Sets function to DAT/VIDEO.
Sets function to PHONO.
Sets function to CD DIRECT.
@) DECK! operation keys: Same as the Deck | operation switches
@
@) TUNER STATION key
* Before operation, memorize broadcast stations in the STATION CALL
switches.
+
... Stations change in order in the upward direction
—
... Stations change in order in the downward direction.
) GRAPHIC
EQUALIZER operation keys.
ON/OFF:
Turns the equalizer on and off.
CALL:
Recalls
the
preset
equalization
curves
(PRESET)
and
memorized equalization curves (MEMORY) in sequence.
© VOLUME
+ (UP)/- (DOWN) key
When pressed, VOLUME on the amplifier is actually moved by a motor.
@ SURROUND
key
Turns SURROUND & STEREO WIDE on and off.
72
Deck Il operation keys: Same as Deck | operation switches
plus Deck II recording switch @ (except for MUTE).
(9) CD operation keys
Perform the connections so that the CD piayer is operated by the remote
control unit.
Crracaceie tals Play
DISG..: sesscnSsteie
DISC selection
ED cicisciendilstedavvess Stop
DO saceiecst esebsicecde Pause
Ke,
Py...
Track search
NOTE:
Note that the DISC selector key on the remote control unit may not
operate, depending on the CD player used.
@® Timer operation keys
SLEEP:
Sets the sleep timer. Each time you press this key, the
setting changes as shown here. The current setting is
shown on the tuner display.
Power turns off when your set time has elapsed.
90
60
30
(Approx.90
(Approx.60
(Approx.30
minutes)
minutes)
minutes)
00
(OFF)
If you press the SLEEP key during SLEEP operation, the
display wilt show the time remaining till power turns off.
WAKE-UP:
Timer playback setting/cancellation can be performed
when the timer playback time has been set. This is shown
in the tuner display section.
SNOOZE:
Turns off power if pressed after timer playback begins.
Timer playback begins again approx. 5 minutes later.
The amplifier input selector automatically switches to the music source
being operated when you press the CD playback (f), cassette tape
deck playback (<1, >), or tuner station controls.
NOTE:
/t is not possible to operate the CD player with the remote control unless
the remote control cord is connected
Range of remote control
When
the remote contro! unit is pointed at the remote sensor
window on the tuner and any of its keys is pressed, the tuner and
other components can be operated by remote control.
Distance: Within a range of approx. 7 meters from the remote sensor
window on the tuner.
Angle: Within approx. 30 degrees from the center of the remote
sensor window on the tuner.
Remote contro! will not be possible if there is an obstacle between
the remote control unit itself and the remote sensor window on the
tuner.
Performance of the remote control unit is adversely affected in the
presence of strong fluorescent light. Keep such lights away, specially
from the sensor window.
Advertisement
