Table of Contents
Advertisement
RADIO MODE
RANGE SELECTION BUTTON
6
A/F
A/F
TP
4
– A/F button
4
Use the A/F button
to switch between
the "FM" and "AM" ranges.
4
Press the A/F button
repeatedly to
switch between the memory levels "FM1"
and "FM2" or "AM1" and "AM2".
The display shows "FM1" or "FM2" for the
memory levels in the FM range, and
"AM1" or "AM2" for the memory levels in
the AM range.
6
Tone control
4
AUD
AUD
1
6
1
– Tone control button
After pressing the AUD button
lowing indications appear in the display:
• 1 pressure: bass control "BASS",
• 2 pressures: treble control "TRE".
You may change the tone control setting
by turning the control knob/push button
Bass control (BASS)
1 1
GEO
• Press the AUD button
the current setting +6 to –6 appear in the
display.
• Turn the control knob/push button
the left or the right to adjust the desired
setting.
TP
• If you wish to adjust the bass control
immediately to its centre setting, press
the AUD button
appears in the display.
• When this is done, press the AUD button
1
1
again to store the setting. This will sel-
, the fol-
ect at the same time the treble control
mode.
6
.
1
. "BASS" and
6
to
1
until "BASS 00"
Advertisement
Table of Contents
