Creating A Factory Default Backup; Backing Up Your Wireless And Lan Drivers - Acer Aspire TC-1760-UA93 User Manual

Creating a factory default backup

Recovery Drive allows you to quickly and easily back up your
operating system, installed apps and data.
1. From Start, select Windows Tools in all apps list then Recovery
Drive.
2. Select Yes to open the Recovery Drive window.
3. Make sure Back up system files to the recovery drive is selected
and click Next.
4. Plug in the USB drive and wait for the PC to detect the USB drive
then click Next.
5. Everything on the drive will be deleted. Click Create to continue.
6. You will be shown the backup progress on the screen.
7. Follow the process until it completes.
8. Unplug the USB drive and label it clearly.
Important
Write a unique, descriptive label on the backup, such as 'Windows
Recovery Backup'. Make sure you keep the backup in a safe place that
you will remember.
Note
Since the recovery backup requires at least 8 GB of storage after formatting,
it is recommended to use a USB drive with a capacity of 16 GB or larger.

Backing up your wireless and LAN drivers

Back up your wireless and LAN drivers. You can use these backups to
install the wireless and LAN drivers if you install another operating
system.
1. From Start, select Care Center in all apps list then Recovery
Management.
2. Select the Backup tab and click Get started for Backup wireless
and LAN drivers. Choose a folder to save your drivers and select
OK.
3. You will be shown the backup progress on the screen.
Recovery - 11