System - Gigaset R700H protect PRO Manual

System

System
Testing DECT encryption
(depending on the base)
When this function is enabled, the handset tests whether the DECT connection to the base is
secure, i.e. is encrypted. If not, a message is shown on the display.
Settings
If a repeater without encryption is used, the secure connection test must be deacti-
vated.
If, on the base, encryption is deactivated at a later time while the secure connection test is
enabled (because a repeater needs to be connected for example), is shown on the handset Secu-
rity Info - Press INFO.
Info . . . the situation is explained
During a call
An advisory tone and a message on the display indicate when encryption is disabled on the base
during a call.
Continue call:
Stop call:
If neither is pressed, the call is stopped automatically after a certain time.
Testing the secure connection status during a call:
Press the hash key
display
Change handset PIN
The handset is protected against unauthorised use by a PIN. The handset PIN must be entered
e.g. when switching off the keypad lock.
Change the handset's 4-digit PIN (default setting: 0000):
Settings
PIN OK use
If the correct handset PIN is not entered after 5 failed attempts, a 15-second timer is
started. Every failed attempt thereafter doubles the timer (up to a maximum delay of
8 hours between PIN entry attempts).
64
OK System OK
Sec. off . . . the security check is deactivated
Yes
No
for a longer time . . . the secure connection status is shown on the
OK System OK
to enter a new handset PIN
Availability and operation of the functions
may differ on your telephone.
Security Check Edit (
Handset PIN OK
OK
= activated)
use to enter the current