Table of Contents
Advertisement
11. Quick start mode: Select Off or On. Turn on to speed up boot speed.
12. Over Clock: The default is "Off",
When Over Clock = "Off", It support max resolution to 3840x2160-144
When Over Clock = "On", It support max resolution to 3840x2160-150Hz
13. HDMI2.1: The default is "On", HDMI1 (2.1) & HDMI2 (2.1) can support max resolution.
---------------------------------------------------------------------------------------------------------
Note:
HDMI 2.1 = "On" is Default
•
•
HDMI 2.1 = "Off"
•
•
14. DSC: The default is "On", Support DP has DSC Function.
---------------------------------------------------------------------------------------------------------
Note:
DSC = "On" is Default
•
•
DSC = "Off"
•
•
•
15. Deep Sleep: Default is on.
-----------------------------------------------------------------------------------------------------------
Note:
•
When Deep Sleep is set to on and there is no signal, the monitor will enter sleep
mode, this mode can save power consumption.
HDMI Input can support max resolution is 3840x2160-(144/150) Hz.
Support max resolution (Need refer to the "Over Clock").
HDMI Input can support max resolution 3840x2160-60 Hz.
Some graphics cards may not support HDMI2.1, it is recommended
to switch to HDMI2.0.
Only Support DP , HDMI to be gray out and unavailable.
Can support max resolution must refer to the "Over Clock".
For some devices such as mobile phones, DSC needs to be set to
Off to display properly.
Resolutions that can be supported will depend on the capabilities of
the graphics card, and may not be able to display 4K-(144/150)Hz.
Some devices do not support DSC. If the display cannot be
displayed normally, please set DSC to Off.
Advertisement
Table of Contents
