Advertisement
IR TEST- The IR Test function can be turned ON to test the sensing range of the
camera. With IR Aim ON the LED on the front of the camera will flash each time
the camera detects presence; however, a picture will not be taken.
Info Strip - When the Info Strip is turned ON, the information strip, as described
in the Advanced Setup section of this manual, is printed on the photos. When the
Info Strip is turned OFF, the photo contains no information strip. Press ENTER
on the INFO STRIP screen. Press UP/DOWN to change the value. Press Enter
again to select value.
Default Settings (default No) - To restore all the settings back to the factory
default, press the ENTER button on the DEFAULT SETTINGS screen. Press the
UP/DOWN button to change the value to YES
Delete Photos (default No) - To remove all the images from the internal memory
or on the SD card if installed, press the ENTER button on the ERASE IMAGES
screen. Press the UP/DOWN button to change the value to YES and SELECT to
erase photos.
Flash (default On) - To modify the Flash setting, press the ENTER button on the
FLASH screen. Press UP/DOWN to switch between FLASH ON and FLASH
OFF and press ENTER again to select desired setting.
and ENTER to activate.
Page 7
GPS GameSpy Connect is an optional accessory and is sold separately. Refer to
www.moultriefeeders.com for more information.
""*■ Cellular Modem - If you have the GPS GameSpy Connect option, turn on the
Cellular Modem to enable communications between the camera and the
Moultrie Server. Press ENTER on the CELLULAR MODEM screen, press
UP/DOWN to change the value and ENTER again to select value.
CELLULAR MODEM
ON
Max Images/Day - Use this option to limit number of images sent per day.
Press ENTER on the MAX IMAGES/DAY screen, press UP/DOWN to change
the value and ENTER again to select value.
Delete Photos After Upload
To remove photos from camera memory after they have been sent to the
Moultrie Server, press ENTER on the DELETE PHOTOS AFTER UPLOAD
screen, press UP/DOWN to change the value to Y and ENTER again to select
value.
_
DELETE PHOTOS
AFTER UPLOAD? N
Photo Upload Resolution
Photos can be stored in camera memory at one resolution (Photo Quality) and
sent to the Moultrie Server (Photo Upload) in a lower resolution. The lower the
Photo Upload Resolution, the (a) smaller the file (b) less megabytes required
from your monthly plan and (c) the lesser the quality of the image sent to your
Moultrie InBox. PHOTO UPLOAD RES = LOW WILL ALLOW THE
MAXIMUM NUMBER OF PHOTOS TO BE SENT TO YOUR ACCOUNT
WITHIN A FIXED MEGABYTE PLAN. To change the Photo Upload
Resolution, press ENTER on the PHOTO UPLOAD RES screen, press
UP/DOWN to change the value and ENTER again to select value. Resolution
settings include LOW, MEDIUM, and HIGH.
Page 8
Advertisement
