5/28/22, 10:13 AM
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1Vndqfc83F
Removing and installing/replacing headlining (for equipment specification with slide/tilt sunroof)
Connect connectors (1) and lock.
Clip in the cable for the roof function centre (FZD) (2)
in the cable clip.
Thread the roof function centre (FZD) (1) as shown at
a steep angle into the two guides (2) on the headlining
(3).
Make sure the headlining is not deformed during this
operation.
Clip the roof function centre (FZD) (1) upwards into
the clamps (2).
28/39