Advertisement
Cleaning
k The Groomer should be cleaned after each use.
I
Always switch Groomer OFF and remove cord
from charing stand and charging plug from
outlet before cleaning.
t
Never clean, remove or replace shaving head
assembly while motor is on.
k Do not apply pressure to shaving head. Do not
touch foil with hard objects as this may dent or
damage foil or cutters. If damage occurs, replace
damaged parts.
► Do not use Groomer if foil, cutters or trimmers
are damaged or broken as injury may occur,
k Only use the cleaning brush supplied. Any other
brush may cause damage.
D Always switch Groomer OFF, remove the
charging plug from outlet and remove cord
from charging stand before cleaning.
□ If a trimming comb is attached to the
Groomer, remove it by pulling it off the
appliance.
□ Remove the shaving foil head by pulling it off
the appliance (Fig. 8).
Hold the shaving l^ad by the plastic housing only.
□ Brush the hairs off the shaving foil and cutter
block. Make sure to also brush away any
hairs collected under the trimmers (Fig. 9).
□ Reattach the shaving foil head by snapping it
back onto the Groomer (Fig.lO). You will hear
a ''click".
□ Rinse the Groomer under warm or cool
running tap water to rinse away any
remaining shaving/trimming debris (Fig. 11).
□ After rinsing, gently shake excess water from
Groomer. Wipe the Groomer body dry with
a clean towel or cloth.
• Do not use a towel or cloth to dry shaving
foil or cutters as this may cause damage:
allow to air dry.
I
Never clean the Groomer with harsh chemicals
as they can damage the Groomer.
Advertisement
