Please read this manual carefully before operating your PDWMU90 Multifunctional UHF Wireless Adapter and retain it for future reference. FEATURES: • Works with any Dynamic Microphone • Wireless XLR Adapter System • Transmitter and Receiver for Dynamic Microphones • 48k UHF Digital •...
TECHNICAL SPECS: • Tuning Bandwidth: 510-560 MHz • Working Range: Up to 90ft. Actual Range (Depends on Rf Signal Absorption, Re ection, and Interference) • Audio Frequency Response: 20Hz-20KHz (-3dB) (Dependent on Microphone Type or Input Signal) • Dynamic Range: 110dB •...
QUICK START 1. Plug the Transmitter into the XLR dynamic 2. Plug the Receiver into the Mixer or microphone and battery-powered condenser power speaker. microphones. www.PyleUSA.com...
Page 5
3. Press the power button, turn 4. Con rm the Trasmitter 5. Check the connection by ON the Transmitter and the switch select the talking through the receiver, the OLED will be lit microphone. so you can check the frequency if the same. www.PyleUSA.com...
BASIC OPERATION TRANSMITTER 1. Transmitter: 1. XLR Plug 2. OLED Display 3. Power button 4. USB 5V recharge socket 5. Function Setting 6. Microphone/Music audio option switch Power button: Press and hold for 2 seconds, turn ON/OFF the unit. Set button: At stand-by mode, press and hold for 2 seconds, start pairing with receiver unit, press one time, change to next working channel.
Page 7
BASIC OPERATION RECEIVER 2. Receiver: 1. XLR Plug 2. OLED display 3. Power button 4. USB 5V recharge socket 5. Function setting Power button: Press and hold for 2seconds, turn ON/OFF the unit. Set button: At stand-by mode, press and hold for 2 seconds, start pairing with transmitter unit. 3.
TROUBLESHOOTING ISSUE SOLUTION • Check that the Receiver's RF LED is lit. • Check that the microphone is turned on and receiving signal from the Transmitter. • Check that the power switch is turned on for both the Transmltter and No Sound the Recelver.