Table of Contents
Advertisement
4-5-5 Checking the I/O terminal status
Check the I/O connection status and its operation using the functions in the PC configuration software "Laser Marker NAVI
smart" Operation procedure.
„ I/O monitor
I/O monitor indicates ON/OFF status of the I/O terminals on the laser marker.
Open the I/O monitor with the following procedure.
1.
Establish an online connection between your PC and the laser marking system.
2.
Go to the "Monitor" screen.
3.
Select "I/O monitor" in the ribbon. The I/O monitor appears.
• The input and output status of the I/O monitor is updated every 500ms.
• There is a margin of error between the actual input/output time and the ON/OFF time displayed on the screen.
4.
To close the "I/O monitor" dialog, select "Close" or "X".
ME-LPRH-SM-3
"I/O monitor" tool
115
Advertisement
Table of Contents
Troubleshooting
