Keypad Functions - Yaesu VX-177 Operating Manual

C
ONTROLS
Primary Function
( P K )
Secondary Function
( P [ F ] + K )
Third Function
( P K )
& H
Primary Function
( P K )
Secondary Function
( P [ F ] + K )
Third Function
( P K )
& H
Primary Function
( P K )
Secondary Function
( P [ F ] + K )
Third Function
( P K )
& H
Primary Function
( P K )
Secondary Function
( P [ F ] + K )
Third Function
( P K )
& H
1 : You can program the secondary (press [ F ] key +) function of the key to another function, if
desired. See page 61 for details.
6
& C
ONNECTORS K
Frequency entry digit "1."
Activates the CTCSS or
DCS Operation.
None
Frequency entry digit "4."
Selects the direction of the uplink
frequency shift (either "–," "+," or
"simplex") during repeater operation.
Activates the EMERGENCY
function.
Frequency entry digit "7."
Selects the Scan Resume Mode.
None
Sets the frequency control to the
Memory Recall mode.
Activates the "Memory "Tune" mode
while in the Memory Recall mode.
Selects the Memory Scan "Skip"
channel-selection mode.
Starts the programmable scanner
upward (toward a higher frequency
or a higher channel number)
Selects the CTCSS tone or
Activates the ARTS feature.
Selects the CTCSS/DCS Bell ringer
1
Activates the Internet Connection
Engages the Set (Menu) Mode.
Enables Internet access code
VX-177 O
F
Frequency entry digit "2."
DCS code number.
Frequency entry digit "5."
repetitions.
None
1
Frequency entry digit "8."
Selects the LCD/Keypad
Lamp Mode.
None
feature.
Frequency entry digit "0."
selection.
M