Advertisement
1R/SX-301
1R/SX-201
8. PANEL FACILITIES
¢ The tllustration shows SX-311R multi-voltage model.
@ POWER (STANDBY/ON) switch
(SX-311R,
SX-251R)
STANDBY
indicator
(SX-311R multi-voltage model only)
This is the switch for electric power.
ON:
When set to the ON position, power is supplied and
the unit becomes operational.
STANDBY:
When set to the STANDBY position, the main pow-
er flow is cut and the unit is no longer fully opera-
tional. A minute
flow of power
feeds the unit to
maintain opetation readiness.
* The accessory remote control unit can also be used to operate
STANDBY/ON.
(For SX-311R multi-voltage model]
Even when the power
is in STANDBY,
the STANDBY
indicator
remains lit.
NOTE:
When the power is initially turned ON, muting will be applied to
prevent sound from being output for approx.
5 seconds.
@ POWER
( Bl
OFF, _=a
ON) switch
(SX-301, SX-201)
When this switch is pressed, power is supplied to the unit.
Press the switch again to turn power OFF.
[Timer ON/OFF possible]
When the unit is switched ON, ON/OFF control can be performed
by means of the optional timer.
NOTE:
When the power is initially turned ON, muting will be applied to
prevent sound from being output for about 5 seconds.
@ PHONES jack
Connect the piug on your headphones to this jack. To listen to a
program through the headphones,
set both SPEAKERS
A and B
switches to the OFF position.
@ SPEAKERS ( Ml OFF, =m ON) buttons
These are used to select the speaker through which you wish to
listen.
A: When the speakers connected to A terminalis are in use.
B: When the speakers connected to B terminals are in use.
* Turn both A and B speakers to OFF position when
only the
headphones
are in use.
NOTE:
No sound will be heard through the speakers when both A and B
buttons are depressed if only one set o speakers has been con-
nected to either
A or
B SPEAKERS terminals.
42
@ STATION CALL buttons
These buttons are used to preset and recall desired broadcasting
stations.
(6) TAPE 2 MONITOR button
Press when listening to tape playback with the cassette deck 2.
6) Function buttons
Use to select playback source.
{TAPE
1/DAT]
—
Press when listening to tape playback
with the cassette deck 1 or digital audio tape deck.
{VCR/LD] — Press when listening to programs from a com-
ponent connected to the VCR/LD terminals.
[CD] —
Press when
listening to compact
disc playback
with a CD player.
[TUNER] — Press when listening to AM or FM broadcasts
with a tuner.
[PHONO]
— Press when listening to record playback on a
turntable.
@ MEMORY
button
When the unit is in the frequency display mode, pressing this but-
ton will result in the memorization of the current broadcast band,
reception frequency, and FM AUTO/MONO
mode.
This button
is also used to input custom
memory
names.
(8) MEMORY
SCAN button
This button is used for both station memory scan and custom me-
mory scan.
@ BAND Selector buttons
These buttons are used to select either AM or FM reception.
{® CUSTOM MEMORY buttons
Stations can be assigned to STATION CALL buttons according to
the genre of material broadcast (POP, ROCK,
OTHER).
You can
recall a particular genre, and scan all the stations of that genre
with Memory Scan until you reach the desired one.
Advertisement
