Table of Contents
Advertisement
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable and the fan cable from the system board. Then, remove three
screws and open the right hinge.
Figure 24. Disconnect cables
Screw specifications
M2 x L4
M2.5 x L4.5
Step 2.
Disconnect the DC-in connector and remove the DC-in cable.
Figure 25. Disconnect and remove the DC-in cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
Number of screws
1
2
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
41
Advertisement
Table of Contents
