Step & Repeat - Xerox CSX 2000 Supplementary Manual

Step & Repeat
Program the job
Enter parameters according to the following table:
Without Crop Marks
Parameters
Method
Set to Step & Repeat
Template
Set to 2x1 Duplex Rotated
Fit to sheet
Do not Check the
Trim Size
Change to Custom
and set: H = 11.0; W = 8.3
Marks
Check that Crop Marks
Margins Set Spine Trim Size = 0.0
M i n i m u m
Minimum Margin
Verify your programming:
Select the Template parameter.
The dynamic thumbnail allows you
to visually check your job,
while it highlights conflicts in red.
The Letter sized pages should now
be placed correctly on the Tabloid sheet.
Submit the job
Press the button to submit the job to
the queue.
Fit to sheet box
are not selected
G u t t e r S i z e = 0 . 4
Size = 0.0
Imposition made easy
With Crop Marks
Set to Step & Repeat
Set to 2x1 Duplex Rotated
Do not Check the Fit to sheet
Change to Custom
and set: H = 10.6; W = 8.1
Select Crop Marks
Set Spine Trim Size = 0.0
M i n i m u m G u t t e r S i z e =
Minimum Margin Size =
Imposition
Method Step & Repeat
Template 2X1 Dup Rotated
Size Custom (11.0, 8.3)
Marks
None
Margins (0.0, 0.4, 0.0)
Creep (0.0, 0.0)
With Crop Marks & Fit to sheet
Set to Step & Repeat
Set to 2x1 Duplex Rotated
box Check the Fit to sheet
Letter
Select Crop Marks
Set Spine Trim Size = 0.0
0 . 4 M i n i m u m G u t t e r
0.2 Minimum Margin
Template options
Category:
System
2X1
Template:
Duplex Rotated
Layout:
Fit to sheet
box
S i z e = 0 . 4
Size = 0.2
Use-Defind