Pioneer PL-X430 Operating Instructions Manual

Operating Instructions
Bedienungsanleitung
Mode d'emploi
lstruzion per uso
STEREO TURNTABLE
STEREO-PLATTENSPIELER
PLATINE TOURNE-DISQUE STEREO
GIRADISCH! STEREO
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of con-
necting and operating the unit is the same.
WARNING: To prevent FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
"This product is manufactured to comply with the radio in-
terference requirements of EEC Directive 76/889/EEC and
82/499/EEC."
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this
switch. U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
Mains voltages in Saudi Arabia are 127 V and 220 V only.
The line voitage selector switch is located on the top of the
cabinet of this turntable. Before your turntable is shipped from
the factory, the switch'is set to the power requirements of the
turntable's destination. Check that it is set properly before
plugging the power cord into the outlet. If the voltage is not
properly set or if you move to an area where the voltage re-
quirements differ, adjust the selector switch as follows:
@ Use a medium-sized screwdriver. Insert the tip of the
screwdriver into the groove of the selector switch and
turn it so that the power voitage marking of your area
Points to the arrow.
dW) PIONEER'
The future of sound and vision.
i)
=
4
Saad
E