Device Description; Usage; Initial Use - Beurer BM 28 Instructions For Use Manual

5. DEVICE DESCRIPTION

The associated drawings are shown on page 3.
Cuff
1
Cuff connector
3
Connection for cuff con-
5
nector
Connection for mains part
7
9
START/STOP button
SET button
11
Information on the display
Time and date
12
Diastolic pressure
14
Cardiac arrhythmia
16
symbol
Pulse symbol
Memory display:
18
average value ( ),
morning ( ), evening
( ), memory space
number
20
Alarm function
22
User memory
Resting indicator display
24
Cuff line
2
Display
4
Risk indicator
6
Function buttons -/+
8
M memory button
10
Systolic pressure
13
Calculated pulse rate
15
17 Release air
Battery replacement
19
symbol
Risk indicator
21
Cuff position control
23

6. USAGE

6.1 Initial use

Inserting the batteries
• Remove the battery compartment cover on the back of the
device .
A
• Insert four 1.5-V AA (alkaline type LR6) batteries. Insert the
batteries, making sure the polarity is correct according to the
label .
A
• Close the battery compartment cover.
If the symbol is displayed and does not disappear, meas-
urement is no longer possible. Replace all the batteries. Once the
batteries have been removed from the device, the date and time
must be set again. Any saved measured values are retained.
Operation with the mains part
You can also operate this device with a mains part (not included in
delivery). However, before connecting the device with the mains
part, please ensure that you have removed the batteries from the
device. During mains operation, there must not be any batteries in
the battery compartment, as this could damage the device.
• To avoid any potential damage, the device may only be oper-
ated with a mains part that meets the specifications described
in the chapter "Technical specifications".
• Furthermore, the mains part must only be connected to the
mains voltage that is specified on the type plate.
• Insert the mains part into the connection provided for this pur-
pose on the right-hand side of the blood pressure monitor.
• Then insert the mains plug of the mains part into the mains
socket.
24