Vector Synthesizer (Їог Аеайіте Моісе Міхіпа); Reference 42 - Yamaha PortaSound PSS-790 Owner's Manual

* The Harmony Type you assign will be memorized until you shut off the
POWER. Next time when you turn the PSS-790, «1» Duet will be
selected automatically.
Step 3: Push the HARMONY ON/OFF button.
When you press the HARMONY ON/OFF button, the LED
lights up, and you will be set-up to play in the currently
selected Harmony Type.
VOICE EFFECT
TYPEJ-6 0-24 0-7 0-3
€ о о о
HARMONY VOLUME VIBRATO REVERB
AAA
ON
OFF
*
When the Harmony ON/OFF button is turned ON, you can play only
one note at a time (If you press more than one note at a time, the
highest note, only is given priority and played).
*
When the VECTOR SYNTH or PAD ASSIGN is turned ON, you cannot
use the HARMONY function.
*
The Harmony function works very effectively when you are using Auto
Accompaniment. For you can have the Harmonized tones in accord
with the Chord Progression.
<< Reference #1 >>
>> When you combine certain Voice Effects the
result produced can be very effective. For example, by
adding Vibrato and Reverb both to a member of the string
family, (VIOLIN 1, CELLO, etc.), you can express reality
and expanse simultaneously.
»» Also, it is possible to apply a Vibrato and/or
Reverb combination with the Harmony Effects. Then on top
of that, when you add the Pitch Bend Effect, it can sound
really super.
12
Harmony Types |
1. Duet Adds Harmony that sounds like two people
are playing.
2. Trio Adds Harmony that sounds like three people
| are playing.
3. Block Adds Harmony that sounds like Jazz type
chording.
4. Country | Adds Harmony that sounds like Country
Music style.
5. Octave | Plays additional notes in Octaves.
6. Strum | Adds Harmony as given by playing the each
chord tone in order.
e. Vector Synthesizer (for
Realtime Voice Mixing)
The Vector Synthesizer function offers you a realtime sound
creation out of any 4 Voices among the 100 factory pre- -
sets. This is easily carried out balancing the amounts of
each Voice by the Joy Stick as you desire.
Step 1: Press the VECTOR SYNTH ON/OFF button.
When the VECTOR SYNTH ON/OFF button is turned ON,
the LED lights up, and you will be set-up to use the Vector
Synthesizer function. When you move the Joy Stick
perpendicularly, STYLE/VOICE display shows the 4
following Voices currently mixed. If you press the key, you
will be able to hear the mixed sound of 4 Voices.
* The initial pre-assigned 4 Voices are Voice No.00, No.99, No.34, and
No.64.
STYLE/VOICE
AC
НЕ
Step 2: Moving the Joy Stick:
Move the Joy Stick around freely as you play, the Joy Stick
moves in every direction. (upward ,downward, and
sideways Left and Right) Listen to how the balance of the
4 voices will change as you move the Joy Stick.
Ici
«Example» change the volume of the pre-assigned
(initial) 4 Voices, by the position of the Joy Stick.
>> When you move the Joy Stick Downward,
Indication of the STYLE/VOICE display changes to <99>,
and you can hear Voice No.99 (which is ORCHESTRA
HIT), with emphasis. Ж
>> When you move the Joy Stick to the Right,
Indication of the STYLE/VOICE display changes to <34>,
and you can hear Voice No.34 (which is STRINGS 1), with
emphasis.
au
Іш Дін |
STYLE 'voice
>> When you move the Joy Stick Upward,
Indication of the STYLE/VOICE display changes to <00>,
and you can hear Voice No.00 (which is PIANO), with
emphasis.
Ir
a
e
ra
O m тп Сә Еп
z
A PA ғғ,
e