Table of Contents
Advertisement
2. Leaving the
knob
pulled out
,
position
a
film
cartridge
in the
chamber
with the project
-
ing-spool
end
toward the bottom of the
camera.
Then push the back-cover release
knob all the way in, rotating it
slightly
to do
so
if necessary.
3
.
Insert the
end
of the film leader as shown
into one of the slots in the take-up spool so
that the tooth is
engaged
with a sprocket
hold near the
end
of the leader. Make sure
that the
end
of the leader does not project
from
another
slot between tabs on the
spool.
15
Advertisement
Table of Contents
